Biogas Gensets Engine Water cooled, Spark Ignition, 4-Stroke, 1500 rpm continuous rating, heavy duty, multi-cylinder Engine. Specially designed and engineered to operate with gases obtained from bio methane plants . A specially designed automatic air and fuel controller and mixing system is provided to take care of efficient, smooth working of engine from no load to full load .These engines operates smoothly at vast combinations of bio gases at negative suction upto 80 mm of water column hence root blower is not required and gases can be feed at normal available pressure. These are inclusive of the following, |
| |
- 12 V Starter
- Radiator with Fan and water Pump
- Lub Oil Filter
- Flywheel suitable for Genset (Heavy)
- Panel with Charging Ammeter ,Oil Pressure gauge , water temperature gauge and starting switch
| | - Battery Charging Alternator
- Air / gas mixing system
- Heavy Duty Air Filter
- Industrial Silencer
|
|
| Alternator |
| Prakash highly efficient self Excited, Self Regulated, screen protected, drip proof, suitable for continuous operation ,1 or 3 Phase 230 / 415 Volts, 0.8 pf, 50 Hz, Class F insulation alternator confirming to IS:4722/IS:13364/BS:5000. Provided with IP 21 protection,10 % overloading and capability of starting the motors at 3 times the rated current of alternator. |
| |
Mounting Frame |
| Engine and Alternator are mounted, coupled, aligned on a common rigid base frame, having provision for antivibration mounting and holes for safely lifting of complete D. G. Set. |
| |
Control Panel
A superior Quality control panel of suitable CRC sheet, powder coated for long life and better finish complete with followings, |
- M.C.B./ M.C.C.B.
- Ammeter
- Lub Oil Filter
- Incoming / Outgoing terminals
- Hour Meter
| | - Voltmeter
- Frequency Meter
- Heavy Duty Air Filter
- Phase Indicator Lamps
|
|
